Surge Protection in AC and DC Systems: How to Protect Electrical Equipment
Overvoltages can damage electrical equipment, cause system malfunctions and lead to costly repairs. With the growing use of photovoltaic systems, battery energy storage and electric vehicle charging stations, effective surge protection is becoming increasingly important. How do surge protective devices work, and what should we consider when selecting the right protection?

What Is Overvoltage and How Can We Protect Against It?
Overvoltage occurs when the voltage in an electrical network or installation exceeds its normal value. Common causes include lightning strikes, switching operations, network changes and electromagnetic interference.
To protect electrical equipment against transient overvoltages, we use surge protective devices (SPDs), which limit voltage surges and divert surge currents.
Depending on their application, SPDs are divided into three main types:
-
Type 1 (T1): Protection against partial lightning currents, typically installed at the entrance of an electrical installation.
-
Type 2 (T2): Protection against induced and switching surges, most commonly installed in distribution boards.
-
Type 3 (T3): Additional protection for sensitive electronic equipment, installed as close as possible to the protected device.
Combined Type 1+2 (T1+T2) devices are also available, providing both protection functions in a single unit.
For example, the ETITEC C T2 275/20 1+0 surge protective device has a declared voltage protection level of Up = 1.5 kV. It helps limit dangerous voltage surges and reduce the risk of damage to connected equipment. The actual effectiveness of the protection also depends on proper installation and the design of the electrical system.

Surge Protection in DC Systems
Just as in AC networks, surge protection is essential in direct current (DC) circuits. Unlike AC systems, DC circuits do not have a natural periodic current zero crossing. Therefore, protective devices must be specifically designed for the relevant DC voltages and operating conditions.
Dedicated DC surge protective devices are primarily used in photovoltaic systems, battery energy storage systems, DC electric vehicle charging stations and industrial power supply systems.
Photovoltaic (PV) Systems
Due to their exposure to atmospheric conditions and often lengthy cable connections, photovoltaic systems require carefully selected surge protection.
On the DC side, SPDs are typically installed near the inverter and, when necessary, closer to the PV modules. The ETITEC M T2 PV 1100/20 Y is designed for these applications. Where lightning protection requirements demand it, Type 1 or combined Type 1+2 protection may also be necessary.

Battery Energy Storage Systems (BESS)
Battery energy storage systems contain sensitive power electronics, making surge protection an important factor in ensuring reliable operation.
For these applications, ETI offers the ETITEC M T2 DC 1000/20 Y, designed for surge protection in DC systems. A key feature of this solution is its compatibility with suitable ETI NH1 gBAT 200 A / 1500 V DC fuse-links, provided that the required coordination between protective devices is ensured.

DC Electric Vehicle Charging Stations
Fast DC charging stations contain powerful converters and sensitive electronic components, making surge protection essential on both the AC supply side and the DC output side.
The ETITEC SM T2 EVDC 1000/20 Y is designed to protect the DC side of high-voltage EV charging systems, taking into account the requirements of the IEC 61643-41 standard.

What Should We Consider When Selecting an SPD?
Common mistakes include using AC surge protective devices in DC systems, selecting an incorrect voltage rating, using excessively long connecting conductors, inadequate grounding and insufficient coordination between different protection stages.
Proper SPD selection depends on the type of electrical system, maximum operating voltage, required surge discharge capacity and installation location.
Protection That Supports Reliable Operation
Surge protection is an important part of modern electrical installations. Whether protecting a residential building, photovoltaic installation, battery energy storage system or EV charging station, properly selected and installed SPDs can reduce the risk of equipment damage and improve overall system reliability.
With its ETITEC product range, ETI provides surge protection solutions for a wide variety of AC and DC applications.